Other paintwork coatings
Nano Ceramic Protect®
Shadow
Slider

CERAMIC PAINTWORK PROTECTION

A new, latest method of applying Nano Ceramic Protect® coatings developed in the USA together with SATA, a manufacturer of varnishing equipment. Advantages of the method: shortening the application time, covering 100% of the surface, reducing product consumption, increasing the thickness of the coating.

Recommended products application - Nano Ceramic Protect® SATA Spraying System

Product performance increase
BENEFIT 100%
Increased application accuracy, coating thickness, reduced application time
BENEFIT 100%

Nano Ceramic Protect® Remover

Nano Ceramic Protect® Remover

Nano Ceramic Protect® Remover is a chemical, high-quality degreasing alcohol-based preparation. This primer is necessary before applying ceramic protective coatings for car paint, chrome and glass. After application of Nano Ceramic Protect® Remover, the applied preparations adhere firmly to the cleaned surface, which makes them last longer on its surface. The product should be used before all car paint and glass protection.

The product is available for sale separately: the capacity is 80 ml.

Methods of application: manually with sponge applicator or with NCP SATA Spraying System.

CERAMIC PAINTWORK PROTECTION FOR 12 MONTHS

A new, latest method of applying Nano Ceramic Protect® coatings developed in the USA together with SATA, a manufacturer of varnishing equipment. Advantages of the method: shortening the application time, covering 100% of the surface, reducing product consumption, increasing the thickness of the coating.

Nano Ceramic Protect® Soft

Nano Ceramic Protect® Soft

Nano Ceramic Protect® Soft is the high quality product protecting car paint surface from a harmful influence of external causes. Unusually easy and short lasting (about 30 minutes) method of preparation application, allows to gain an excellent effect with a minimum workload.Thanks to the ceramic structure, the covering which we gain, protects the paint from the permanent impurity, and environmental factors, which have a negative influence on its condition. The preparation molecular create an invisible net, which advantages allow to save time and money, devoted to frequent paint clean so far. Nano Ceramic Protect® Soft stays on a surface of paint up to 12 months, however it is recommended to refresh the surface after 6 months.

Set contains:
√ 80 ml Nano Ceramic Protect® Soft
√ sponge applicator
√ microfiber 30×30 cm

Methods of application: manually with sponge applicator or with NCP SATA Spraying System.

CERAMIC PAINTWORK PROTECTION FOR 6 MONTHS

A new, latest method of applying Nano Ceramic Protect® coatings developed in the USA together with SATA, a manufacturer of varnishing equipment. Advantages of the method: shortening the application time, covering 100% of the surface, reducing product consumption, increasing the thickness of the coating.

Nano Ceramic Protect® Sealant

Nano Ceramic Protect® Sealant

Nano Ceramic Protect® Sealant – is a unique synthetic wax made from a combination of the highest quality polymers, without the addition of silicone. It masks smaller scratches, discolorations and mists, leaving a protective layer that lasts up to 6 months. Nano Ceramic Protect® Sealant facilitates the car’s washing process and ensures protection of min. against: UV rays, road salt and insect adhesion. Surface preparation: In order for the Nano Ceramic Protect® Sealant to remain on the surface of our car for as long as possible, a key aspect is surface preparation. Before using the Nano Ceramic Protect® Sealant, wash the car thoroughly with Nano Ceramic Protect® Shampoo, and use a Nano Ceramic Protect® Remover.

Set contains:
√ 80 ml Nano Ceramic Protect® Sealant
√ sponge applicator
√ microfiber 30×30 cm

BENEFITS: √ easy in application, √ durability up to 6 months, √ protection against UV rays, √ protection against harmful environmental factors, √ high hydrophobicity: the phenomenon of repelling water or dirt particles from the surface protected with a lacquer formulation that stays dry and clean for a long time, √ high paintwork gloss, saturated and nourished color of the lacquer.

To extend the life of Nano Ceramic Protect® Sealant, use Nano Ceramic Protect® Quick Detailer after each wash.

Methods of application: manually with sponge applicator.

CERAMIC PAINTWORK PROTECTION FOR 3 MONTHS

A new, latest method of applying Nano Ceramic Protect® coatings developed in the USA together with SATA, a manufacturer of varnishing equipment. Advantages of the method: shortening the application time, covering 100% of the surface, reducing product consumption, increasing the thickness of the coating.

Nano Ceramic Protect® Crystal Wax

Nano Ceramic Protect® Crystal Wax

Nano Ceramic Protect® Crystal Wax is the finest nanotechnological wax which protects your car paint surface from a harmful influence of external causes. Unusually easy and short lasting (about 30 minutes) method of preparation application, allows to gain an excellent effect with a minimum workload. Thanks to the ceramic structure, the covering which we gain, protects the paint from the permanent impurity and environmental factors, which have a negative influence on its condition. The preparation molecular create an invisible net, which advantages allow to save time and money, devoted to frequent paint clean so far. Nano Ceramic Protect® Crystal Wax stays on a surface of paint up to 3 months. The product is available for sale separately: the capacity is 80 ml.

BENEFITS: √ Easy in application,√ Durable up to 3 months, √ High paint gloss, rich and nourished colour, √ UV radiation resistance, √ Protection from harmful environmental factors, √ High hydrophobicity: the phenomenon of water and impurity molecules repulse from a surface of a paint covered by preparation, which stays dry and clean for a long time.

Methods of application: manually with sponge applicator.